Cable Testing / Locating

Testing
Output: 0 – 20 kV (negative with regard to earth)
0 – 10 kV, 115 mA constant
0 – 20 kV, 58 mA constant
Resolution: 5 mA
Metering: Analog metering of current and voltage
Low-voltage Pre-location
MTDR100
Range: 10 ranges; 100 m – 55 km (328 ft – 34 miles)
100 m – 220 km (328 ft – 137 miles) – transient
methods
Pulse width: 50, 100, 200, 500 ns, 1, 2,5,10 µs, and auto
Pulse Amplitude: 25 V into 50 ?
Sampling Rate: 100 Mhz
Timbase Accuracy: 200 ppm
Resolution (Vp=55%): 0.82 m (2.8 ft)
Display: 26.4 mm (10.4 in.), full XGA,
1024 X 768 color display
Cursors: Dual independent control
Gain: 60 dB range in 5 dB Steps
Input: Impedance 50 ?
Inputs: 1 x TDR/ARC, 1 x current impulse
Ports: 1 x printer/USB memory device
Software: CAS1 (Cable analysis software)
High Voltage Pre-location
Arc Reflection: 0-8 and 0-16 kV, 1500 Joule
Arc Reflection Plus: 0-8 and 0-16 kV, 1500 Joule
1024 – 16 traces dependent on range
Differential Arc Reflection: 0-8 and 0-16 kV , 1500 Joule
Impulse Current: 0-8 and 0-16 kV, 1500 Joule
Fault Conditioning
Proof/burn: 0 – 20 kV 58 mA
0 – 10 kV 115 mA
Pinpoint Fault Location
Surge: 0 – 8 and 0 -16 kV, @ 1500 Joule
Impulse Sequence: Adjustable 5 – 30 seconds
Single Shot
Cables
HV: Detachable 15 m (50 ft) 1-phase flexible
shielded cable with HV crock-clips
Input/Supply: Input Cable
Earth: 15 m (50 ft) 8 mm2 flexible earth cable with vice grips
Safety
High visibility “status” bar
Emergency stop
Safety Interlock circuit
External beacon circuit
Supply
Universal AVSM 2-ranges: 108 – 132 V ac and 208 – 265 V ac 47 – 63 Hz
Inverter: 11.5 – 14 V dc (Optional)
Environmental
Operating Temperature: -20 ° to +50 °C (-4 ° to 122 °F)
Storage Temperature: -20 ° to +55 °C (-4 ° to 131 °F)
Elevation: 1600 m (De-rate voltages at higher altitudes)
Humidity: 5 to 95% RH non-condensing
IP Rating
IP64 (with top/back flaps closed)
Weight
131 kgs (290 lbs)
Dimensions
965 mm H x 536 mm W x 503 mm D
(38 in. H x 21 in. W x 20 in. D)